Atlas Copco GR 110-200 High Pressure oil-injected air compressor |
|
 |
The Atlas Copco GR110-200 series is a two stage, oil-injected screw compressor designed for higher pressure air application from 13 bar up to 20 bar. With a two stage design, both low and high pressure elements are built onto the gearbox driven by a highly efficient TEFC electric motor (IP-55, Class F insulation), guaranteeing the most efficient operation at higher pressure |
Built for high pressure air application, the new two stage Atlas Copco GR is not only a work horse but also offers all the features and benefits the Atlas Copoc GA series is renowned for. Also available as a Full Feature version, the new two stage Atlas Copco GR incorporates a refrigeration type air dryer. With an optional filter that can also be integrated, the two stage Atlas Copco GR comes as a complete compressor package installation. The new two stage Atlas Copco GR Full Feature is a complete and efficient package compressor for applications where higher pressure air is required. |
|
Regulation |
|
 |
The two stage Atlas Copco GR has a proven efficient regulation system. With a full load/no load regulation system, achievable energy savings can be realised. Simply designed and largely dimensioned, the regulating system has few moving parts allowing minimal pressure drop and limited maintenance. |
Control and Monitoring |
|
 |
The Elektronikon® control and regulation system.
|
| Electronic sensors fitted at key locations in the compressor feed data on temperature and pressure to an onboard microprocessor. The microprocessor continuously and accurately monitors the status of the entire compressor system from key readings and automatically regulates and controls the compressor for optimum performance and efficiency. The Elektronikon® system has a "controlled stop" function, shutting down the compressor motor after the unloading pressure is reached or when an extended period of unloaded running is anticipated. This means less energy consumption, less wear, longer maintenance intervals with reduced unscheduled down time. Instructions are given to the compressor via touch sensitive membrane switches. The Elektronikon® system is fully programmed at the factory and can be easily reprogrammed if conditions on site require differing parameters of control. Elektronikon® speaks your language and offers an option for a second one. It will also give prior indications of service requirements and helps to plan maintenance interventions in advance. |
|
